Tools required for an oil change - BMW X2 Forum
 
LinkBack Thread Tools
post #1 of 3 (permalink) Old 12-17-2019, 02:12 PM Thread Starter
Junior Member
 
Join Date: Dec 2019
Posts: 2
Tools required for an oil change

Can someone please verify the proper tools to do an oil change for the 2019 X2 xdrive28i. Is the oil pan drain plug 17mm socket? Is the oil filter housing 32mm socket? Thanks
utahmikenteresa is offline  
post #2 of 3 (permalink) Old 12-20-2019, 03:35 PM Thread Starter
Junior Member
 
Join Date: Dec 2019
Posts: 2
Ok just completed an oil change on my 2019 X2 xdrive28i at 7500 mile; the oil drain pan plug used is a 17mm socket; oil filter housing drain plug used was a T55 star bit socket; and a 32mm low profile socket to remove the oil filter housing. Requires 5.25 liters of oil or 5.50 quarts 0W-20 full synthetic oil. Pretty straight forward used a set of car ramps to get underneath the vehicle and drain the oil.
utahmikenteresa is offline  
post #3 of 3 (permalink) Old 12-29-2019, 10:24 PM
Senior Member
 
Join Date: Feb 2017
Posts: 454
Some independent shops charge a decent rate. Are you open to that route or only want to do it yourself?
cityrun is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome